Heat Sink

Heat Sink General Features
  • It provides high strength with its monoblock welded structure.
  • There is no filtering and cutouts for air circulation on the enclosure, indoor and outdoor air circulation is done by special alloyed and shaped aluminum profiles.
  • 1.50 mm thick galvanized sheet is used as the outer wall of the enclosure.
  • Angled top cover can prevent rain, snow, etc. on the enclosure.
  • Thanks to the air gap between the enclosure and top cover, the temperature level of the enclosure is prevented from rising.
  • Full IP protection is provided thanks to the IP protected cable glands used from the enclosure bottom face.
  • There are 2 sets (4 qty) 19” mounting rails.
  • There is 1 switch holder for dry contact switch connection.
  • Thanks to the 3-point locking, encoded, full metal swingle handle lock, the enclosure door is fully closed and the dust and water tightness that will enter through the enclosure edge is increased to the highest level.
  • Thanks to front door with blind hinge, superior protection is provided against vandalism.
  • Thanks to the special outdoor paint Ral 7035, long-term protection is provided against external factors.

 

Color Options
  • RAL:7035 Outdoor type paint
  • QUALITY MANAGEMENT SYSTEM TS EN ISO 9001-2015
  • TS EN 61587-1
  • TRADEMARK REGISTRATION
  • (ROHS-PHT) TURT200168153
  • CE EN 61587-1 2012
  • CE EN 62208 - 2011
  • EMC CERTIFICATE FOR FAN MODULES
  • LVD FAN MODÜLÜ SERTİFİKASI
  • IEC EN 62262 IK10 TEST CERTIFICATE
  • TS EN 60529 IP55 CERTIFICATE
  • TS EN 60529 IP66 CERTIFICATE
  • TS EN 60529 IP67 CERTIFICATE